R2511-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V5)

254
<RouterA> system-view
[RouterA] ospf
[RouterA-ospf-1] area 0
[RouterA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[RouterA-ospf-1-area-0.0.0.0] quit
[RouterA-ospf-1] quit
# On Router B, configure OSPF and enable route redistribution from IS-IS.
[RouterB] ospf
[RouterB-ospf-1] area 0
[RouterB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[RouterB-ospf-1-area-0.0.0.0] quit
[RouterB-ospf-1] import-route isis 1
[RouterB-ospf-1] quit
# Display the OSPF routing table on Router A. The redistributed routes are available.
[RouterA] display ospf routing
OSPF Process 1 with Router ID 192.168.1.1
Routing Tables
Routing for Network
Destination Cost Type NextHop AdvRouter Area
192.168.1.0/24 1 Transit 192.168.1.1 192.168.1.1 0.0.0.0
Routing for ASEs
Destination Cost Type Tag NextHop AdvRouter
172.17.1.0/24 1 Type2 1 192.168.1.2 192.168.2.2
172.17.2.0/24 1 Type2 1 192.168.1.2 192.168.2.2
172.17.3.0/24 1 Type2 1 192.168.1.2 192.168.2.2
192.168.2.0/24 1 Type2 1 192.168.1.2 192.168.2.2
Total Nets: 5
Intra Area: 1 Inter Area: 0 ASE: 4 NSSA: 0
4. Configure filtering lists on Router B:
# Configure ACL 2002 to allow route 172.17.2.0/24 to pass.
[RouterB] acl number 2002
[RouterB-acl-basic-2002] rule permit source 172.17.2.0 0.0.0.255
[RouterB-acl-basic-2002] quit
# Configure IP prefix list prefix-a to allow route 172.17.1.0/24 to pass.
[RouterB] ip ip-prefix prefix-a index 10 permit 172.17.1.0 24
5. Configure a routing policy on Router B:
[RouterB] route-policy isis2ospf permit node 10
[RouterB-route-policy] if-match ip-prefix prefix-a
[RouterB-route-policy] apply cost 100
[RouterB-route-policy] quit
[RouterB] route-policy isis2ospf permit node 20
[RouterB-route-policy] if-match acl 2002
[RouterB-route-policy] apply tag 20