R2511-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V5)

332
Task Command Remarks
Display IS-IS enabled interface
information.
display isis interface [ statistics |
[ interface-type interface-number ]
[ verbose ] ] [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display LSDB information.
display isis lsdb [ [ l1 | l2 | level-1 | level-2 ]
| [ [ lsp-id lsp-id | lsp-name lspname |
local ] | verbose ] * ] * [ process-id |
vpn-instance vpn-instance-name ] [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display IS-IS mesh group
information.
display isis mesh-group [ process-id |
vpn-instance vpn-instance-name ] [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display the mapping table
between the host name and system
ID.
display isis name-table [ process-id |
vpn-instance vpn-instance-name ] [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display IS-IS neighbor information.
display isis peer [ statistics | verbose ]
[ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display IPv6 IS-IS routing
information.
display isis route ipv6 [ [ level-1 | level-2 ] |
verbose ] * [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display SPF log information.
display isis spf-log [ process-id |
vpn-instance vpn-instance-name ] [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display the statistics of the IS-IS
process.
display isis statistics [ level-1 | level-1-2 |
level-2 ] [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Clear all IS-IS data structure
information.
reset isis all [ process-id | vpn-instance
vpn-instance-name ]
Available in user view.
Clear the IS-IS data information of
a neighbor.
reset isis peer system-id [ process-id | vpn
vpn-instance-name ]
Available in user view.
IPv6 IS-IS configuration examples
IPv6 IS-IS basic configuration example
Network requirements
As shown in Figure 94, Router A, Router B, Router C, and Router D, all enabled with IPv6, reside in the
same autonomous system. Configure IPv6 IS-IS on the routers so that they can reach each other.
Router A and Router B are Level-1 routers, Router D is a Level-2 router, and Router C is a Level-1-2 router.
Router A, Router B, and Router C belong to area 10, and Router D is in area 20.