R2511-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V5)

347
Ste
p
Command Remarks
4. Allow the establishment of EBGP
connection to an indirectly connected peer
or peer group.
peer { ipv6-group-name |
ipv6-address } ebgp-max-hop
[ hop-count ]
Not configured by
default.
Configuring a description for an IPv6 peer or peer group
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv6 address family
view.
ipv6-family N/A
4. Configure a description for an
IPv6 peer or peer group.
peer { ipv6-group-name | ipv6-address }
description description-text
Optional.
Not configured by default.
The peer group to be
configured with a
description must have been
created.
Disabling session establishment to an IPv6 peer or peer group
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv6 address family view.
ipv6-family N/A
4. Disable session establishment to an
IPv6 peer or peer group.
peer { ipv6-group-name |
ipv6-address } ignore
Optional.
Not disabled by default.
Logging IPv6 peer or peer group state changes
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enable logging of peer
changes globally.
log-peer-change
Optional.
Enabled by default.
4. Enter IPv6 address family
view.
ipv6-family N/A
5. Enable the state change
logging for an IPv6 peer or
peer group.
peer { ipv6-group-name |
ipv6-address } log-change
Optional.
Enabled by default.
For information about the
command, see Layer 3—IP Routing
Command Reference.