R2511-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V5)

[RouterA-rip-1] network 192.168.1.0

[RouterA-rip-1] quit

[RouterA] interface ethernet 1/1

[RouterA-Ethernet1/1] rip bfd enable

[RouterA-Ethernet1/1] quit

[RouterA] rip 2

[RouterA-rip-2] network 192.168.2.0

[RouterA-rip-2] quit

# Configure Router B.

<RouterB> system-view

[RouterB] rip 1

[RouterB-rip-1] version 2

[RouterB-rip-1] undo summary

[RouterB-rip-1] network 192.168.2.0

[RouterB-rip-1] network 192.168.3.0

[RouterB-rip-1] quit

# Configure Router C.

<RouterC> system-view

[RouterC] rip 1

[RouterB-rip-1] version 2

[RouterB-rip-1] undo summary

[RouterC-rip-1] network 192.168.1.0

[RouterC-rip-1] network 192.168.3.0

[RouterC-rip-1] import-route static

[RouterC-rip-1] quit

3. Configure the BFD parameters on Ethernet 1/1 of Router A:

[RouterA] bfd session init-mode active

[RouterA] bfd echo-source-ip 11.11.11.11

[RouterA] interface ethernet 1/1

[RouterA-Ethernet1/1] bfd min-transmit-interval 500

[RouterA-Ethernet1/1] bfd min-receive-interval 500

[RouterA-Ethernet1/1] bfd detect-multiplier 7

[RouterA-Ethernet1/1] return

4. Configure a static route on Router C:

[RouterC] ip route-static 100.1.1.1 24 null 0

5. Verify the configuration:

# Display the BFD session information of Router A.

<RouterA> display bfd session

Total Session Num: 1 Init Mode: Active

Session Working Under Echo Mode:

LD SourceAddr DestAddr State Holdtime Interface

3 192.168.1.1 192.168.1.2 Up 2000ms Eth1/1

# Display RIP routes destined for 100.1.1.0/24 on Router A.

<RouterA> display ip routing-table 100.1.1.0 24 verbose

Routing Table : Public

Summary Count : 2

Destination: 100.1.1.0/24