R2511-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V5)

# Configure Router B.

<RouterB> system-view

[RouterB] interface ethernet 1/2

[RouterB-Ethernet1/2] ip address 192.168.1.2 24

[RouterB-Ethernet1/2] quit

[RouterB] interface ethernet 1/1

[RouterB-Ethernet1/1] ip address 192.168.2.1 24

# Configure Router C.

[RouterC] bfd session init-mode active

[RouterC] interface ethernet 1/1

[RouterC-Ethernet1/1] ip address 192.168.2.2 24

[RouterC-Ethernet1/1] bfd min-transmit-interval 500

[RouterC-Ethernet1/1] bfd min-receive-interval 500

[RouterC-Ethernet1/1] bfd detect-multiplier 6

[RouterC-Ethernet1/1] quit

[RouterC] interface ethernet 1/2

[RouterC-Ethernet1/2] ip address 192.168.4.2 24

[RouterC-Ethernet1/2] quit

# Configure Router D.

[RouterD] interface ethernet 1/2

[RouterD-Ethernet1/2] ip address 192.168.4.1 24

[RouterD-Ethernet1/2] quit

[RouterD] interface ethernet 1/1

[RouterD-Ethernet1/1] ip address 192.168.3.2 24

[RouterD-Ethernet1/1] quit

4. Configure static routes:

# Configure a static route to Router C on Router A.

[RouterA] ip route-static 192.168.2.0 24 ethernet1/2 192.168.1.2

[RouterA] quit

# Configure a static route to Router A on Router C.

[RouterC] ip route-static 192.168.1.0 24 ethernet1/1 192.168.2.1

5. Verify the configuration:

# Display the BFD session information of Router A.

<RouterA> display bfd session

Total Session Num: 1 Init Mode: Active

Session Working Under Ctrl Mode:

LD/RD SourceAddr DestAddr State Holdtime Interface

6/1 192.168.1.1 192.168.2.2 Up 1700ms Eth1/2

# Display RIP routes destined for 100.1.1.0/24 learned on Router A.

<RouterA> display ip routing-table 100.1.1.0 verbose

Routing Table : Public

Summary Count : 2

Destination: 100.1.1.0/24

Protocol: RIP Process ID: 1

Preference: 100 Cost: 1

IpPrecedence: QosLcId: