R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

93
Table 14 Command output
Field Description
Type
Entry type:
• D—Dynamic.
• S—Static. Static DHCP snooping entries are not supported.
• R—Specifies that the DHCP snooping entry is being restored through the
DHCP snooping entry file, and the interface in the entry is invalid.
IP Address IP address assigned to the DHCP client.
MAC Address MAC address of the DHCP client.
Lease Remaining lease duration in seconds.
VLAN
Outer VLAN tag when DHCP snooping and QinQ are both enabled or the
DHCP snooping device receives a packet with two VLAN tags, or VLAN
where the port connecting the DHCP client resides.
SVLAN
Inner VLAN tag when DHCP snooping and QinQ are both enabled or the
DHCP snooping device receives a packet with two VLAN tags, or N/A.
Interface Port to which the DHCP client is connected.
Related commands
• dhcp-snooping
• reset dhcp-snooping
display dhcp-snooping binding database
Use display dhcp-snooping binding database to display information about the DHCP snooping entry
file.
Syntax
display dhcp-snooping binding database [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display DHCP snooping entry file information.
<Sysname> display dhcp-snooping binding database