R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

95
Format: Verbose
Circuit ID format-type: HEX
Remote ID format-type: ASCII
Node identifier: aabbcc
Sub-option 9: Enabled
User defined:
Circuit ID: company001
Sub-option 9 content: group1
Interface: Ethernet 1/2
Status: Disable
Strategy: Keep
Format: Normal
Circuit ID format-type: HEX
Remote ID format-type: ASCII
User defined:
Circuit ID: company001
Remote ID: device001
VLAN 10:
Circuit ID: vlan10@company001
Sub-option 9: Enable
Sub-option 9 content: group1
VLAN 20:
Remote ID: device001
Sub-option 9: Enabled
display dhcp-snooping packet statistics
Use display dhcp-snooping packet statistics to display DHCP packet statistics for DHCP snooping.
Syntax
display dhcp-snooping packet statistics [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters
Examples
# Display DHCP packet statistics for DHCP snooping.
<Sysname> display dhcp-snooping packet statistics