R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

145
Syntax
display nat address-group [ group-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
group-number: Specifies a NAT address group number in the range of 0 to 31. If this argument is not
provided, this command displays information about all NAT address pools.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display NAT address pool information.
<Sysname> display nat address-group
NAT address-group information:
There are currently 2 nat address-group(s)
1 : from 202.110.10.10 to 202.110.10.15
2 : from 202.110.10.20 to 202.110.10.25
# Display information about NAT address group 1.
<Sysname> display nat address-group 1
NAT address-group information:
1 : from 202.110.10.10 to 202.110.10.15
Table 30 Command output
Field Descri
p
tion
1 : from 202.110.10.10 to 202.110.10.15
The range of IP addresses in address pool 1 is from
202.110.10.10 to 202.110.10.15.
Related commands
nat address-group
display nat aging-time
Use display nat aging-time to display the NAT aging time settings for various protocols.
Syntax
display nat aging-time [ | { begin | exclude | include } regular-expression ]
Views
Any view