R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

148
Ethernet1/4 out-static
NAT aging-time value information:
tcp ---- aging-time value is 300 (seconds)
udp ---- aging-time value is 240 (seconds)
icmp ---- aging-time value is 10 (seconds)
pptp ---- aging-time value is 300 (seconds)
dns ---- aging-time value is 10 (seconds)
tcp-fin ---- aging-time value is 10 (seconds)
tcp-syn ---- aging-time value is 10 (seconds)
ftp-ctrl ---- aging-time value is 300 (seconds)
ftp-data ---- aging-time value is 300 (seconds)
no-pat ---- aging-time value is 240 (seconds)
NAT log information:
log enable : enable
flow-begin : enable
flow-active : 40(minutes)
# Display all NAT configuration information.
<Sysname> display nat all
NAT address-group information:
There are currently 2 nat address-group(s)
1 : from 202.110.10.10 to 202.110.10.15
2 : from 202.110.10.20 to 202.110.10.25
NAT bound information:
There are currently 1 nat bound rule(s)
Interface: GigabitEthernet1/1
Direction: outbound ACL: 2036 Address-group: --- NO-PAT: N
VPN-instance: ---
Out-interface: ---
Next-hop: ---
NAT server in private network information:
There are currently 1 internal server(s)
Interface: GigabitEthernet1/1, Protocol: 6(tcp)
Global: 50.1.1.1 : 23(telnet)
Local : 192.168.10.15 : 23(telnet)
NAT static information:
There are currently 2 NAT static configuration(s)
net-to-net:
Local-IP : 1.1.1.0
Global-IP : 2.2.2.0
Netmask : 255.255.255.0
Unidirectional : N
Local-VPN : vpn1
Global-VPN : vpn2