R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

152
Examples
# Display NAT logging configuration information.
<Sysname> display nat log
NAT log information:
log enable : enable acl 2000
flow-begin : enable
flow-active : 10(minutes)
Table 35 Command output
Field Descri
p
tion
NAT log information : NAT logging configuration information.
log enable : enable acl 2000 Logging data flows matching ACL 2000.
flow-begin : enable Logging newly established sessions.
flow-active : 10(minutes) Interval in logging active flows (10 minutes).
Related commands
• nat log enable
• nat log flow-active
• nat log flow-begin
display nat server
Use display nat server to display information about internal servers.
Syntax
display nat server [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about internal servers.
<Sysname> display nat server
NAT server in private network information:
There are currently 2 internal server(s)