R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

8
Default
Natural mask support for ARP requests is disabled.
Views
System view
Default command level
2: System level
Examples
# Enable natural mask support for ARP requests.
<Sysname> system-view
[Sysname] naturemask-arp enable
reset arp
Use reset arp to clear ARP entries except authorized ARP entries from the ARP table.
Syntax
reset arp { all | dynamic | static | interface interface-type interface-number }
Views
User view
Default command level
2: System level
Parameters
all: Clears all ARP entries except authorized ARP entries.
dynamic: Clears all dynamic ARP entries.
static: Clears all static ARP entries.
interface interface-type interface-number: Clears the ARP entries for the interface specified by the
argument interface-type interface-number.
Usage guidelines
The command clears only the dynamic ARP entries of the interface specified by the interface
interface-type interface-number option.
Examples
# Clear all static ARP entries.
<Sysname> reset arp static
Related commands
• arp static
• display arp