R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

181
Syntax
display natpt aging-time [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default Level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the NAT-PT session aging time of different protocols.
<Sysname> display natpt aging-time
NATPT aging-time value information:
tcp -------aging-time value is 86400 (seconds)
udp -------aging-time value is 40 (seconds)
icmp -------aging-time value is 20 (seconds)
dns -------aging-time value is 10 (seconds)
syn -------aging-time value is 240 (seconds)
finrst -------aging-time value is 5 (seconds)
frag -------aging-time value is 5 (seconds)
Table 43 Command output
Field Descri
p
tion
tcp -------aging-time value is 86400 NAT-PT session aging time of a TCP packet is 86400 seconds.
udp -------aging-time value is 40 NAT-PT session aging time of a UDP packet is 40 seconds.
icmp -------aging-time value is 20 NAT-PT session aging time of an ICMP packet is 20 seconds.
dns -------aging-time value is 10 NAT-PT session aging time of a DNS packet is 10 seconds.
syn -------aging-time value is 240
NAT-PT session aging time of a synchronization packet is 240
seconds.
finrst -------aging-time value is 5 NAT-PT session aging time of a finrst packet is 5 seconds.
frag -------aging-time value is 5 NAT-PT session aging time of a fragment is 5 seconds.
display natpt all
Use display natpt all to display all NAT-PT configuration information.