R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

182
Syntax
display natpt all [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default Level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display all NAT-PT configuration information.
<Sysname> display natpt all
NATPT IPv4 Address Pool Information:
1: from 1.1.1.1 to 1.1.1.4
NATPT address mapping(v6bound view):
IPv4 Address IPv6 Address Type
1.1.1.1 3001::0001 SOURCE
2.2.2.2 3001::0002 DESTINATION
NATPT V6Server static mapping:
IPv4Address IPv6 Address Pro
1.1.1.1^ 6 3001::0003^ 1270 TCP
NATPT V4bound information:
No Dynamic V4 Address Records Present
NATPT V6bound information:
No Dynamic V6 Address Records Present
NATPT Prefix Info:
Prefix Interface NextHop
2001::
NATPT aging-time value information:
tcp -------aging-time value is 86400 (seconds)
udp -------aging-time value is 40 (seconds)
icmp -------aging-time value is 20 (seconds)
dns -------aging-time value is 10 (seconds)
syn -------aging-time value is 240 (seconds)