R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

183
finrst -------aging-time value is 5 (seconds)
frag -------aging-time value is 5 (seconds)
NATPT Statistics:
Total Sessions: 0
Expired Sessions: 0
Hits: 0
Misses: 0
Total Fragment Sessions: 0
Expired Fragment Sessions: 0
Fragment Hits: 0
Fragment Misses: 0
Total Address Mapping: 0 (static: 0 dynamic: 0 )
Total V6Server Mappings: 0
NATPT Interfaces:
Ethernet1/0
For the explanations to the information displayed above, see the descriptions of related commands.
display natpt frag-sessions
Use display natpt frag-sessions to display NAT-PT fragment session information.
Syntax
display natpt frag-sessions [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default Level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display NAT-PT fragment session information.
<Sysname> display natpt frag-sessions
NATPT Fragment-Session Info:
No IPV6Source IPV4Source PacketID
IPV6Destination IPV4Destination
No Fragment-Sessions Present