R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

194
natpt v6bound static
Use natpt v6bound static to configure a static IPv4/IPv6 address mapping on the IPv6 side.
Use undo natpt v6bound static to remove a static IPv4/IPv6 address mapping on the IPv6 side.
Syntax
natpt v6bound static ipv6-address ipv4-address
undo natpt v6bound static ipv6-address ipv4-address
Views
System view
Default Level
2: System level
Parameters
ipv6-address: Specifies the IPv6 address to be mapped.
ipv4-address: Specifies the IPv4 address to which an IPv6 address is mapped.
Examples
# Configure the static mapping between the IPv6 address 2001::1 and the IPv4 address 2.3.4.5 on the
IPv6 side.
<Sysname> system-view
[Sysname] natpt v6bound static 2001::1 2.3.4.5
Related commands
display natpt address-mapping
reset natpt dynamic-mappings
Use reset natpt dynamic-mappings to clear dynamic NAT-PT address mappings.
Syntax
reset natpt dynamic-mappings
Views
User view
Default Level
2: System level
Examples
# Clear dynamic NAT-PT address mappings.
<Sysname> reset natpt dynamic-mappings
reset natpt statistics
Use reset natpt statistics to clear all NAT-PT statistics information.
Syntax
reset natpt statistics