R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

208
Views
Any view
Default command level
1: Monitor level
Parameters
address-map: Specifies the address mapping information between public and private network
addresses of VAM clients.
fsm: Specifies the status information for VAM clients.
client-name: Specifies the VAM client name, a case-insensitive string of 1 to 31 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
With the client-name argument specified, the command displays the registration information for the
specified VAM client.
Without the client-name argument, the command displays the address mapping information about the
other spokes and the hubs on a spoke and displays that about the other hubs on a hub.
As for the arguments not specified, or the information not obtained dynamically, the corresponding
information will not be displayed.
Examples
# Display the status information for VAM client abc.
<Sysname> display vam client fsm abc
Client name: hub
VPN name: 1
Interface: Tunnel0
Resend interval(seconds): 5
Client type: Hub
Username: user1
Primary server: 28.1.1.23
Current state: ONLINE
Holding time: 9h 20m 30s
Encryption-algorithm: AES-128
Authentication-algorithm: SHA1
Secondary server: 28.1.1.33
Current state: OFFLINE
Holding time: 1h 24m 1s
Encryption-algorithm: AES-128