R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

209
Authentication-algorithm: SHA1
Table 49 Command output
Field Descri
p
tion
Client name Name of the VAM client.
VPN name Name of the VPN domain where the VAM client resides.
Interface DVPN tunnel interface of the VAM client.
Resend interval(seconds) Protocol packet retransmission interval of the VAM client.
Client type VAM client type, hub or spoke.
Username Username of the VAM client.
Primary server Public IP address of the primary VAM server.
Current state Current authentication status of the VAM client.
Holding time Period of time that the VAM client stays in its current status.
Encryption-algorithm Negotiated encryption algorithm.
Authentication-algorithm Negotiated authentication algorithm.
Secondary server Public IP address of the secondary VAM server.
# Display the cached address mapping information.
<Sysname> display vam client address-map abc
Client name: abc
VPN name: 1
Total address-map number: 2
Private-ip Public-ip Type Remaining-time(s)
10.0.0.1 222.222.222.1 Hub --
10.0.0.3 222.222.222.3 Spoke 32
Table 50 Command output
Field Descri
p
tion
Client name Name of the VAM client.
VPN name Name of the VPN domain where the VAM client resides.
Total address-map number Number of VAM client private-public address mappings in the VPN domain.
Private-ip Private IP address.
Public-ip Public IP address corresponding to the private IP address.
Type VAM client type, spoke or hub.
Remaining-time(s) Remaining time before the mapping entry ages out.
pre-shared-key (VAM client view)
Use pre-shared-key to configure the pre-shared key of a VAM client, which is used to generate the keys
for encryption and integrity validation of the VAM protocol packets.
Use undo pre-shared-key to remove the configuration.