R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

214
Default
The VAM client feature is disabled.
Views
System view
Default command level
2: System level
Parameters
all: Specifies all configured VAM clients.
name client-name: Specifies an existing VAM client. The client-name argument is a case-insensitive string
of 1 to 31 characters. Valid characters are A to Z, a to z, 0 to 9, and the dot sign (.).
Examples
# Enable the VAM client feature for VAM client spoke.
<Sysname> system-view
[Sysname] vam client enable name spoke
Related commands
• client enable
• vam client name
vam client name
Use vam client name to create a VAM client and enter its view, or enter the VAM client view of an existing
VAM client.
Use undo vam client name to remove a VAM client.
Syntax
vam client name client-name
undo vam client name client-name
Default
No VAM client exists.
Views
System view
Default command level
2: System level
Parameters
client-name: Specifies the name for the VAM client, a case-insensitive string of 1 to 31 characters. Valid
characters are A to Z, a to z, 0 to 9 and the dot sign (.).
Usage guidelines
A VAM client applied to an interface cannot be removed directly.
Examples
# Create a VAM client named abc.