R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

215
<Sysname> system-view
[Sysname] vam client name abc
[Sysname-vam-client-name-abc]
Related commands
• display vam client
• vam client
vpn
Use vpn to specify the VPN to which a VAM client belongs.
Use undo vpn to remove the configuration.
Syntax
vpn vpn-name
undo vpn
Default
A VAM client does not belong to any VPN.
Views
VAM client view
Default command level
2: System level
Parameters
vpn-name: Specifies the name of the VPN that the VAM client belongs to, a case-insensitive string of 1 to
15 characters. Valid characters are A to Z, a to z, 0 to 9, and the dot sign (.).
Examples
# Specify that VAM client abc belongs to VPN 100.
<Sysname> system-view
[Sysname] vam client name abc
[Sysname-vam-client-name-abc] vpn 100
Related commands
• display vam client
• vam client name
DVPN tunnel configuration commands
display dvpn session
Use display dvpn session to display information about DVPN sessions.
Syntax
display dvpn session { all | interface interface-type interface-number [ private-ip ip-address ] } [ | { begin
| exclude | include } regular-expression ]