R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

217
Table 51 Command output
Field Description
Interface DVPN tunnel interface.
VPN name Name of a VPN domain.
Total number Number of DVPN tunnels established on the tunnel interface.
Private IP Private address of the DVPN session peer.
Public IP Public address of the DVPN session peer.
Session type Tunnel type of the DVPN session.
State
Status of the DVPN tunnel.
• SUCCESS—The tunnel is already established.
• ESTABLISH—The tunnel is being established.
• DUMB—The tunnel failed to be established and is now quiet.
Holding time Length of time that the tunnel is in the current state.
Input
Statistics about inbound packets, including the counts of all packets, data
packets, control packets, multicast packets, and erroneous packets.
Output
Statistics about outbound packets, including the counts of all packets, data
packets, control packets, multicast packets, and erroneous packets.
Related commands
reset dvpn session
dvpn session dumb-time
Use dvpn session dumb-time to set the quiet period for a DVPN tunnel.
Use undo dvpn session dumb-time to restore the default.
Syntax
dvpn session dumb-time time-interval
undo dvpn session dumb-time
Default
The quiet period is 120 seconds.
Views
Tunnel interface view
Default command level
2: System level
Parameters
time-interval: Specifies the quiet period of a DVPN tunnel, in the range of 10 to 600 seconds.
Usage guidelines
During the quiet period, the DVPN tunnel is in the sleep state and no tunnel connection exists.