R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

229
Views
Any view
Default command level
1: Monitor level
Parameters
number: Displays IPv6 information on a specific tunnel interface. If you do not specify any interface
number, this command displays IPv6 information about all tunnel interfaces.
brief: Displays brief information of tunnel interfaces. If you do not specify this keyword, this command
displays detailed information and IPv6 packet statistics for tunnel interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display detailed IPv6 information and IPv6 packet statistics for interface Tunnel 0.
<Sysname> display ipv6 interface tunnel 0
Tunnel0 current state :UP
Line protocol current state :UP
IPv6 is enabled, link-local address is FE80::202:201
Global unicast address(es):
3000::1, subnet is 3000::/64
Joined group address(es):
FF02::1:FF02:201
FF02::1:FF00:1
FF02::1:FF00:0
FF02::2
FF02::1
MTU is 1480 bytes
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
IPv6 Packet statistics:
InReceives: 45
InTooShorts: 0
InTruncatedPkts: 0
InHopLimitExceeds: 0
InBadHeaders: 0
InBadOptions: 0
ReasmReqds: 0
ReasmOKs: 0
InFragDrops: 0
InFragTimeouts: 0