R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

240
Views
User view
Default command level
1: Monitor level
Examples
# Clear the statistics of UDP packets forwarded by UDP helper.
<Sysname> reset udp-helper packet
Related commands
display udp-helper server
udp-helper enable
Use udp-helper enable to enable UDP helper.
Use undo udp-helper enable to disable UDP helper.
Syntax
udp-helper enable
undo udp-helper enable
Default
UDP helper is disabled.
Views
System view
Default command level
2: System level
Examples
# Enable UDP helper.
<Sysname> system-view
[Sysname] udp-helper enable
udp-helper multicast-map
Use udp-helper multicast-map to specify a mapping between a multicast address and a subnet
broadcast address. Upon receiving a matching UDP multicast packet, UDP helper converts its destination
multicast address to the specified subnet broadcast address.
Use undo udp-helper multicast-map to remove the mapping.
Syntax
udp-helper multicast-map multicast-address broadcast-address [ acl acl-number ]
undo udp-helper multicast-map multicast-address broadcast-address
Views
Interface view