R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

251
display ipv6 interface
Use display ipv6 interface to display IPv6 information about an interface.
Syntax
display ipv6 interface [ interface-type [ interface-number ] ] [ brief ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type: Specifies an interface by its type.
interface-number: Specifies an interface by its number.
brief: Displays brief IPv6 information about an interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify the interface-type interface-number argument, this command displays IPv6
information about all interfaces.
If you specify only the interface-type argument, this command displays IPv6 information about the
interfaces of the specified type.
If you specify the interface-type interface-number argument, this command displays IPv6 information
about the specified interface. If you also specify the brief keyword, this command displays brief IPv6
information about the interface.
If you have configured the time slots of a CE1/PRI or CT1/PRI interface as an ISDN PRI group using the
pri-set command, then executing the display ip interface command only displays the time slot used by
the control channel (D channel), instead of the ones used by the user channels (B channels). For details
about CE1/PRI and CT1/PRI interfaces, see Interface Configuration Guide.
Examples
# Display IPv6 information about Ethernet 1/1 for which an IPv6 address can be configured.
<Sysname> display ipv6 interface ethernet 1/1
Ethernet1/1 current state :UP ,
Line protocol current state :UP
IPv6 is enabled, link-local address is FE80::200:1FF:FE04:5D00
Global unicast address(es):
2001::1, subnet is 2001::/64
10::200:1FF:FE04:5D00, subnet is 10::/64 [AUTOCFG]