R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

254
Field Descri
p
tion
Physical
Physical state of the interface:
• *down—The interface is administratively shut down by the
shutdown command.
• down—The interface is administratively up but its physical state is
down, which might be caused by a connection or link failure.
• up—The administrative and physical states of the interface are both
up.
Protocol
Link layer protocol state of the interface:
• down—The network layer protocol state of the interface is down.
• up—The network layer protocol state of the interface is up.
IPv6 Address
IPv6 address of the interface. Only the first of configured IPv6
addresses is displayed. If no address is configured for the interface,
Unassigned is displayed.
display ipv6 neighbors
Use display ipv6 neighbors to display neighbor information.
Syntax
display ipv6 neighbors { ipv6-address | all | dynamic | interface interface-type interface-number |
static | vlan vlan-id } [ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-address: Specifies the IPv6 address whose neighbor information is to be displayed.
all: Displays information of all neighbors, including neighbors acquired dynamically and configured
statically on the public network and all private networks.
dynamic: Displays information of all neighbors acquired dynamically.
static: Displays information of all neighbors configured statically.
interface interface-type interface-number: Displays information of the neighbors of a specified interface.
vlan vlan-id: Displays information of the neighbors of a specified VLAN whose ID is in the range of 1 to
4094.
verbose: Displays the detailed information of neighbors.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.