R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

279
Views
Interface view
Default command level
2: System level
Parameters
value: Specifies the neighbor reachable time in milliseconds, in the range of 1 to 3600000.
Examples
# Set the neighbor reachable time on Ethernet 1/1 to 10000 milliseconds.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipv6 nd nud reachable-time 10000
Related commands
display ipv6 interface
ipv6 nd ra halt
Use ipv6 nd ra halt to enable RA message suppression.
Use undo ipv6 nd ra halt to disable RA message suppression.
Syntax
ipv6 nd ra halt
undo ipv6 nd ra halt
Default
RA messages are suppressed.
Views
Interface view
Default command level
2: System level
Examples
# Suppress RA messages on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipv6 nd ra halt
ipv6 nd ra interval
Use ipv6 nd ra interval to set the maximum and minimum intervals for advertising RA messages. The
device advertises RA messages at intervals of a random value between the maximum interval and the
minimum interval.
Use undo ipv6 nd ra interval to restore the default.
Syntax
ipv6 nd ra interval max-interval-value min-interval-value