R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

280
undo ipv6 nd ra interval
Default
The maximum interval between RA messages is 600 seconds, and the minimum interval is 200 seconds.
Views
Interface view
Default command level
2: System level
Parameters
max-interval-value: Specifies the maximum interval for advertising RA messages in seconds, in the range
of 4 to 1800.
min-interval-value: Specifies the minimum interval for advertising RA messages in seconds, in the range
of 3 to 1350.
Usage guidelines
The minimum interval should be three-fourths of the maximum interval or less.
The maximum interval for sending RA messages should be less than or equal to the router lifetime in RA
messages.
Examples
# Set the maximum interval for advertising RA messages to 1000 seconds and the minimum interval to
700 seconds.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipv6 nd ra interval 1000 700
ipv6 nd ra no-advlinkmtu
Use ipv6 nd ra no-advlinkmtu to turn off the MTU option in RA messages.
Use undo ipv6 nd ra no-advlinkmtu to restore the default.
Syntax
ipv6 nd ra no-advlinkmtu
undo ipv6 nd ra no-advlinkmtu
Default
RA messages contain the MTU option.
Views
Interface view
Default command level
2: System level
Examples
# Turn off the MTU option in RA messages on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1