R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

287
Default
Local ND proxy is disabled.
Views
VLAN interface view, Layer 3 Ethernet interface view, Layer 3 Ethernet subinterface view
Default command level
2: System level
Examples
# Enable local ND proxy on interface Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] local-proxy-nd enable
reset ipv6 neighbors
Use reset ipv6 neighbors to clear IPv6 neighbor information.
Syntax
reset ipv6 neighbors { all | dynamic | interface interface-type interface-number | static }
Views
User view
Default command level
2: System level
Parameters
all: Clears static and dynamic neighbor information on all interfaces.
dynamic: Clears dynamic neighbor information on all interfaces.
interface interface-type interface-number: Clears dynamic neighbor information on an interface
specified by its type and number.
static: Clears static neighbor information on all interfaces.
Usage guidelines
You can use the display ipv6 neighbors command to display the current IPv6 neighbor information.
Examples
# Clear neighbor information on all interfaces.
<Sysname> reset ipv6 neighbors all
# Clear dynamic neighbor information on all interfaces.
<Sysname> reset ipv6 neighbors dynamic
# Clear all neighbor information on Ethernet 1/1.
<Sysname> reset ipv6 neighbors interface ethernet 1/1
reset ipv6 pathmtu
Use reset ipv6 pathmtu to clear the path MTU information.