R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

305
undo domain-name
Default
No domain name is configured for the client.
Views
DHCPv6 address pool view
Default command level
2: System level
Parameters
domain-name: Domain name, a string of 1 to 50 characters.
Usage guidelines
You can configure only one domain name in an address pool.
If you use the domain-name command multiple times, the most recent configuration takes effect.
Examples
# Configure the domain name to be assigned to the client as aaa.com.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] domain-name aaa.com
ds-lite address
Use ds-lite address to specify the address of the AFTR.
Use undo ds-lite address to delete the address of the AFTR.
Syntax
ds-lite address ipv6-address
undo ds-lite address
Default
The address of the AFTR is not specified.
Views
DHCPv6 address pool view
Default command level
2: System level
Parameters
ipv6-address: IPv6 address of the Address Family Transition Router (AFTR).
Usage guidelines
When you configure a DS-Lite tunnel, the Customer Premises Equipment (CPE) sends a DHCPv6 request
to obtain the address of the AFTR. Upon receiving the request, the DHCPv6 server sends the address of
the AFTR to the CPE. For more information about the DS-Lite tunnel, see Layer 3—IP Services
Configuration Guide.
You can specify only one AFTR address for an address pool. The latest setting overrides the previous one.