R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

311
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] prefix-pool 1 preferred-lifetime 86400 valid-lifetime 259200
reset ipv6 dhcp server conflict
Use reset ipv6 dhcp server conflict to clear IPv6 address conflict information.
Syntax
reset ipv6 dhcp server conflict { address ipv6-address | all | pool pool-number }
Views
User view
Default command level
2: System level
Parameters
address ipv6-address: Clears conflict information about a specific IPv6 address.
all: Clears all IPv6 address conflict information.
pool pool-number: Clears IPv6 address conflict information about the address pool specified by the pool
number. The value range is 1 to 128.
Examples
# Clear all IPv6 address conflict information.
<Sysname> reset ipv6 dhcp server conflict all
Related commands
display ipv6 dhcp server conflict
reset ipv6 dhcp server ip-in-use
Use reset ipv6 dhcp server ip-in-use to clear IPv6 address binding information.
Syntax
reset ipv6 dhcp server ip-in-use { address ipv6-address | all | pool pool-number }
Views
User view
Default command level
2: System level
Parameters
address ipv6-address: Clears binding information about a specific IPv6 address.
all: Clears all IPv6 address binding information.
pool pool-number: Clears IPv6 address binding information about the address pool specified by the pool
number. The value range is 1 to 128.
Usage guidelines
This command only clears offered and committed static bindings but not free static bindings.
This command changes offered and committed static bindings to free static bindings.