R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

320
Usage guidelines
After this command is executed, the packets statistics are displayed as 0 for the output from the display
ipv6 dhcp relay statistics command.
Examples
# Clear packet statistics on the DHCPv6 relay agent.
<Sysname> reset ipv6 dhcp relay statistics
Related commands
display ipv6 dhcp relay statistics
DHCPv6 client configuration commands
display ipv6 dhcp client
Use display ipv6 dhcp client to display DHCPv6 client information.
Syntax
display ipv6 dhcp client [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Displays DHCPv6 client information about a specific interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify a parameter, the command displays DHCPv6 client information about all interfaces.
Examples
# Display DHCPv6 client information about Ethernet 1/1.
<Sysname> display ipv6 dhcp client interface ethernet 1/1
Ethernet1/1 is in stateless DHCPv6 client mode
State is OPEN
Preferred Server:
Reachable via address : FE80::213:7FFF:FEF6:C818
DUID : 0003000100137ff6c818
DNS servers : 1:2:3::5