R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

337
Parameters
ip-address: Specifies a destination IP address in dotted decimal notation.
mask: Specifies an IP address mask in dotted decimal notation.
mask-length: Specifies the IP address mask length in the range of 0 to 32.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the load sharing statistics for destination 10.2.1.0/24.
<Sysname> display load-sharing ip address 10.2.1.0 24
There are/is totally 3 route entry(s) to the same destination network.
Nexthop Packet(s) Bandwidth[KB] Flow(s) Interface
10.1.1.2 763851 100000 0 Ethernet1/1
10.1.2.2 1193501 155000 0 Atm1/0
10.1.3.2 15914 2048 0 Serial2/0
Table 85 Command output
Field Descri
p
tion
Nexthop Next hop address.
Packet Total number of packets forwarded through the outbound interface.
Bandwidth Bandwidth of the outbound interface used for load sharing.
Flow Number of flows fast forwarded through the outbound interface.
Interface Name of the outbound interface.
ip user-based-sharing enable (system view)
Use ip user-based-sharing enable to enable user-based load sharing.
Use undo ip user-based-sharing enable to restore the default.
Syntax
ip user-based-sharing enable
undo ip user-based-sharing enable
Default
User-based load sharing is disabled.
Views
System view