R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

338
Default command level
2: System level
Examples
# Enable user-based load sharing.
<Sysname> system-view
[Sysname] ip user-based-sharing enable
ip user-based-sharing enable (interface view)
Use ip user-based-sharing enable to enable user-based load sharing on the interface.
Use undo ip user-based-sharing enable to restore the default.
Syntax
ip user-based-sharing enable
undo ip user-based-sharing enable
Default
User-based load sharing on the interface is disabled.
Views
Interface view
Default command level
2: System view
Usage guidelines
The ip user-based-sharing enable command executed in interface view takes effect on the interface only
when it has been executed in system view.
Examples
# Enable user-based load sharing on interface Ethernet 1/1.
<Sysname> system-view
[Sysname] ip user-based-sharing enable
[Sysname] interface ethernet 1/1
[Sysname–Ethernet1/1] ip user-based-sharing enable
load-bandwidth
Use load-bandwidth to specify the bandwidth of the interface for load sharing.
Use undo load-bandwidth to restore the default.
Syntax
load-bandwidth bandwidth
undo load-bandwidth
Default
The load sharing bandwidth of an interface is the physical bandwidth of the interface.