R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

344
Views
System view
Default command level
2: System level
Parameters
priority priority-level: Specifies the priority level for a roaming interface. The value range for the
priority-level argument is 0 to 255, and the default value is 100.
Usage guidelines
A device can have only one roaming interface. If you configure another roaming interface on the same
device, your configuration will fail.
Examples
# Configure GigabitEthernet 0/1 as a roaming interface.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ip mobile router-service roam
ip mobile router-service collocated gateway
Use ip mobile router-service collocated gateway to specify the gateway address for the roaming
interface.
Use undo ip mobile router-service collocated gateway to remove the gateway address of the roaming
interface.
Syntax
ip mobile router-service collocated gateway ip-address
undo ip mobile router-service collocated gateway
Default
No gateway address is manually configured for the roaming interface.
Views
Interface view
Default command level
2: System level
Parameters
ip-address: Specifies a gateway address for the roaming interface, in dotted decimal notation. The
gateway address must be on the same segment as the primary IP address of the roaming interface.
Usage guidelines
This command is only supported on Ethernet interfaces.
Use this command in either of the following situations:
• The interface does not obtain a gateway from the DHCP server.
• The interface has a manually configured IP address.