R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

350
Syntax
tunnel mtu value
undo tunnel mtu
Default
The MTU for the tunnel interface is 17916 bytes.
Views
Mobile router view
Default command level
2: System level
Parameters
value: Specifies an MTU in bytes. The value range is 68 to 17916.
Usage guidelines
The tunnel between the mobile router and the home agent is created dynamically, so set MTU of the
tunnel interface by using this command in mobile router view.
Examples
# Set the MTU of the tunnel interface to 1024 bytes.
<Sysname> system-view
[Sysname] ip mobile router
[Sysname-mobile-router] tunnel mtu 1024
mobile-network
Use mobile-network to specify the mobile router interface that is connected to the mobile network.
Use undo mobile-network to remove the mobile router from the mobile network.
Syntax
mobile-network interface-type { interface-number | interface-number.subnumber }
undo mobile-network interface-type { interface-number | interface-number.subnumber }
Default
No mobile router interface is specified.
Views
Mobile router view
Default command level
2: System level
Parameters
interface-type: Specifies an interface by its type.
interface-number: Specifies an interface by its number.
interface-number.subnumber: Specifies a subinterface number. The interface-number argument specifies
the number of an interface. The subnumber argument specifies the number of subinterface created under
the interface. The value range for the subnumber argument is 1 to 4094.