R2511-HP MSR Router Series Layer 3 - IP Services Command Reference(V5)

57
Views
Interface view
Default command level
2: System level
Parameters
normal: Specifies the normal padding format.
verbose: Specifies the verbose padding format.
node-identifier { mac | sysname | user-defined node-identifier }: Specifies the access node identifier.
• Mac: Uses the MAC address of the access node as the node identifier. It is the default node
identifier.
• Sysname: Uses the device name of a node as the node identifier.
• user-defined node-identifier: Uses a string of 1 to 50 characters as the node identifier.
Usage guidelines
If configuring the handling strategy of the DHCP relay agent as replace, you need to configure a
padding format of Option 82. If the handling strategy is keep or drop, you need not configure any
padding format.
If sub-option 1 (node identifier) of Option 82 is padded with the device name (sysname) of a node, the
device name must contain no spaces. Otherwise, the DHCP relay agent drop the message.
Examples
# Specify the verbose padding format for Option 82.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] dhcp relay information enable
[Sysname-Ethernet1/1] dhcp relay information strategy replace
[Sysname-Ethernet1/1] dhcp relay information format verbose
Related commands
display dhcp relay information
dhcp relay information remote-id format-type
Use dhcp relay information remote-id format-type to configure the code type for the non-user-defined
remote ID sub-option.
Use undo dhcp relay information remote-id format-type to restore the default.
Syntax
dhcp relay information remote-id format-type { ascii | hex }
undo dhcp relay information remote-id format-type
Default
The code type for the remote ID sub-option is HEX.
Views
Interface view