R2511-HP MSR Router Series Layer 3 - IP Services Configuration Guide(V5)

126
Ste
p
Command Remarks
3. Configure a common
internal server.
• nat server index protocol pro-type global
{ global-address global-port1 global-port2 inside
local-address1 local-address2 local-port [ vpn-instance
local-name ] [ track vrrp virtual-router-id ] |
current-interface [ global-port ] inside local-address
[ local-port ] [ vpn-instance local-name ] [ remote-host
host-address ] [ lease-duration lease-time ] [ description
string ] }
• nat server protocol pro-type global { global-address |
interface interface-type interface-number |
current-interface } global-port1 global-port2
[ vpn-instance global-name ] inside local-address1
local-address2 local-port [ vpn-instance local-name ]
[ track vrrp virtual-router-id ]
Use either
command.
Configuring DNS mapping
With DNS mapping, an internal host can access an internal server on the same private network by using
the domain name of the internal server when the DNS server resides on the public network.
To configure a DNS mapping:
Ste
p
Command
1. Enter system view.
system-view
2. Configure a DNS mapping.
nat dns-map domain domain-name protocol pro-type ip global-ip
port global-port
Configuring NAT aging time
NAT aging time configuration supports multiple protocols.
To set the NAT aging time:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A