R2511-HP MSR Router Series Layer 3 - IP Services Configuration Guide(V5)

192
[Spoke2] ipsec profile vamp
[Spoke2-ipsec-profile-vamp] transform-set vam
[Spoke2-ipsec-profile-vamp] ike-peer vam
[Spoke2-ipsec-profile-vamp] sa duration time-based 600
[Spoke2-ipsec-profile-vamp] pfs dh-group2
[Spoke2-ipsec-profile-vamp] quit
4. Configure the DVPN tunnel:
# Configure tunnel interface Tunnel 1 for VPN 1.
To use UDP for tunnel encapsulation, perform the following configurations:
[Spoke2] interface tunnel 1
[Spoke2-Tunnel1] tunnel-protocol dvpn udp
[Spoke2-Tunnel1] vam client dvpn1spoke2
[Spoke2-Tunnel1] ip address 10.0.1.4 255.255.255.0
[Spoke2-Tunnel1] source ethernet 1/1
[Spoke2-Tunnel1] ospf network-type p2mp
[Spoke2-Tunnel1] ospf dr-priority 0
[Spoke2-Tunnel1] ipsec profile vamp
[Spoke2-Tunnel1] quit
To use GRE for tunnel encapsulation, perform the following configurations:
[Spoke2] interface tunnel 1
[Spoke2-Tunnel1] tunnel-protocol dvpn gre
[Spoke2-Tunnel1] vam client dvpn1spoke2
[Spoke2-Tunnel1] ip address 10.0.1.4 255.255.255.0
[Spoke2-Tunnel1] source ethernet 1/1
[Spoke2-Tunnel1] ospf network-type p2mp
[Spoke2-Tunnel1] ospf dr-priority 0
[Spoke2-Tunnel1] ipsec profile vamp
[Spoke2-Tunnel1] quit
5. Configure OSPF:
# Configure OSPF for the public network.
[Spoke2] ospf 100
[Spoke2-ospf-100] area 0
[Spoke2-ospf-100-area-0.0.0.0] network 192.168.1.4 0.0.0.255
[Spoke2-ospf-100-area-0.0.0.0] quit
# Configure OSPF for the private network.
[Spoke2] ospf 200
[Spoke2-ospf-200] area 0
[Spoke2-ospf-200-area-0.0.0.0] network 10.0.1.4 0.0.0.255
[Spoke2-ospf-200-area-0.0.0.0] network 10.0.3.1 0.0.0.255
Verifying the configuration
# Display the address mapping information of all VAM clients registered with the primary VAM server.
[PrimaryServer] display vam server address-map all
VPN name: 1
Total address-map number: 4