R2511-HP MSR Router Series Layer 3 - IP Services Configuration Guide(V5)

12
Step Command Remarks
3. Enable local proxy ARP.
local-proxy-arp enable [ ip-range
startIP to endIP ]
Disabled by default.
Displaying and maintaining proxy ARP
Task Command Remarks
Display whether proxy ARP is
enabled.
display proxy-arp [ interface interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display whether local proxy ARP is
enabled.
display local-proxy-arp [ interface
interface-type interface-number ] [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Proxy ARP configuration examples
Common proxy ARP configuration example
Network requirements
Host A and Host D have the same prefix and mask, but they are located on different subnets. No default
gateway is configured on Host A and Host D.
Configure proxy ARP on the router to enable communication between Host A and Host D.
Figure 6 Network diagram