R2511-HP MSR Router Series Layer 3 - IP Services Configuration Guide(V5)

267
• R F C 4191, Default Router Preferences and More-Specific Routes
• RFC 4443, Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version 6 (IPv6)
Specification
• RFC 4861, Neighbor Discovery for IP Version 6 (IPv6)
• RFC 4862, IPv6 Stateless Address Autoconfiguration
IPv6 basics configuration task list
Task Remarks
Configuring basic IPv6
functions
Enabling IPv6 Required.
Configuring an IPv6 global unicast address
Required to
configure one.
Configuring an IPv6 link-local address
Configure an IPv6 anycast address
Configuring IPv6 ND
Configuring a static neighbor entry Optional.
Configuring the maximum number of neighbors
dynamically learned
Optional.
Setting the age timer for ND entries in stale state Optional.
Configuring parameters related to RA messages Optional.
Configuring the maximum number of attempts to
send an NS message for DAD
Optional.
Enabling local ND proxy Optional.
Configuring path MTU
discovery
Configuring the interface MTU Optional.
Configuring a static path MTU for a specified IPv6
address
Optional.
Configuring the aging time for dynamic path MTUs Optional.
Configuring IPv6 TCP properties Optional.
Configuring IPv6 FIB load sharing Optional.
Configuring ICMPv6 packet
sending
Configuring the maximum ICMPv6 error packets sent
in a
n interval
Optional.
Enabling replying to multicast echo requests Optional.
Enabling sending ICMPv6 time exceeded messages Optional.
Enabling sending ICMPv6 destination unreachable
messages
Optional.
Enabling sending ICMPv6 redirect messages Optional.