R2511-HP MSR Router Series Layer 3 - IP Services Configuration Guide(V5)

315
Configuring Router B
# Enable IPv6 and configure IPv6 addresses of interfaces Ethernet 1/1 and Serial 2/1. By default, IPv6
fast forwarding is enabled in the inbound and outbound directions.
<RouterB> system-view
[RouterB] ipv6
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] ipv6 address 2002::2 64
[RouterB-Ethernet1/1] quit
[RouterB] interface serial2/1
[RouterB-Serial2/1] ipv6 address 2001::2 64
[RouterB-Serial2/1] quit
Verifying the configuration
# Display the IPv6 fast forwarding table on Router B.
[RouterB] display ipv6 fast-forwarding cache
[RouterB]
The output shows that no IPv6 fast forwarding entry exists.
# Ping the IPv6 address of Serial 2/1 of Router C from Router A. Reply packets can be received.
[RouterA] ping ipv6 2001::1
PING 2001::1 : 56 data bytes, press CTRL_C to break
Reply from 2001::1
bytes=56 Sequence=1 hop limit=64 time = 69 ms
Reply from 2001::1
bytes=56 Sequence=2 hop limit=64 time = 1 ms
Reply from 2001::1
bytes=56 Sequence=3 hop limit=64 time = 1 ms
Reply from 2001::1
bytes=56 Sequence=4 hop limit=64 time = 1 ms
Reply from 2001::1
bytes=56 Sequence=5 hop limit=64 time = 1 ms
--- 2001::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/14/69 ms
# Display the IPv6 fast forwarding table on Router B.
IPv6 Fast-Forwarding cache: total 2 item(s)
Index: 224[0]
SIP: 2002::1 SPort: 129
DIP: 2001::1 DPort: 0
Pro: 58 Flg: 256
Input interface: Eth1/1
Output interface: S2/1
Index: 234[0]
SIP: 2001::1 SPort: 128