R2511-HP MSR Router Series Layer 3 - IP Services Configuration Guide(V5)

331
[RouterA] interface serial 2/0
[RouterA-serial2/0] load-bandwidth 300
[RouterA-serial2/0] quit
# Display the bandwidths of the three interfaces.
[RouterA] display loadsharing ip address 10.2.1.0 24
There are/is totally 3 route entry(s) to the same destination network.
Nexthop Packet(s) Bandwidth[KB] Flow(s) Interface
10.1.2.2 142824 100 0 Atm1/0
10.1.1.2 285648 200 0 Ethernet1/1
10.1.3.2 428472 300 0 Serial2/0
After the configuration, the device performs load sharing over the interfaces based on their new
bandwidths.