R2511-HP MSR Router Series MPLS Command Reference(V5)

91
Table 44 Command output
Field Descri
p
tion
connections
Connection statistics, including the number of connections in the state of
Up, the number of connections in the state of Down, the number of local
connections, the number of remote connections, and the number of
unknown connections.
No. Sequence number.
vpn-name Name of the MPLS L2VPN.
local-num Number of local connections.
remote-num Number of remote connections.
unknown-num Number of unknown connections.
up-num Number of connections that are up.
total-num Total number of connections.
display mpls l2vpn fib ac vpws
Use display mpls l2vpn fib ac vpws to display Attachment Circuit (AC) information for MPLS L2VPN.
Syntax
display mpls l2vpn fib ac vpws [ interface interface-type interface-number [ service-instance
service-instanceid ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies the interface connected to a CE by its type and
number.
service-instance service-instanceid: Specifies a service instance by its ID, in the range of 1 to 4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you specify an interface but do not specify a service instance, the command displays the AC entries of
the VCs created on the Layer 3 interface.
If you specify both an interface and a service instance, the command displays the AC entries of the VCs
created for the service instance on the Layer 2 interface.