R2511-HP MSR Router Series MPLS Command Reference(V5)

99
Configure the same destination multicast MAC address on the local and remote PEs when the
l2protocol-tunnel command with the tunnel keyword, or with the tunnel and experimental keywords is
configured on the PEs.
Examples
# Configure the destination multicast MAC address as 0010-cd10-10ac.
<Sysname> system-view
[Sysname] l2protocol-tunnel mac-address 0010-cd10-10ac
Related commands
l2protocol-tunnel
l2vpn
Use l2vpn to enable L2VPN and enter L2VPN view.
Use undo l2vpn to disable L2VPN.
Syntax
l2vpn
undo l2vpn
Default
L2VPN is disabled.
Views
System view
Default command level
2: System level
Examples
# Enable L2VPN and enter L2VPN view.
<Sysname> system-view
[Sysname] l2vpn
[Sysname-l2vpn]
l2vpn-family
Use l2vpn-family to enter BGP L2VPN address family view.
Use undo l2vpn-family to delete all configurations for the BGP L2VPN address family.
Syntax
l2vpn-family
undo l2vpn-family
Views
BGP view
Default command level
2: System level