R2511-HP MSR Router Series MPLS Command Reference(V5)

Examples

# Display the ILM entry with a specific incoming label.

<Sysname> display mpls ilm 60

Inlabel In-Interface Token VRF-Index Oper LSP-Type Swap-Label

-----------------------------------------------------------------------------

60 Eth1/1 1 0 NULL STATIC LSP -

# Display all ILM entries.

<Sysname> display mpls ilm

Total ILM Entry: 2

Inlabel In-Interface Token VRF-Index Oper LSP-Type Swap-Label

-----------------------------------------------------------------------------

60 Eth1/1 1 0 NULL STATIC LSP -

80 Eth1/2 2 0 NULL STATIC LSP -

Table 2 Command output

Field Descri

tion

Total ILM Entry Total number of ILM entries.

Inlabel Incoming label.

In-Interface Incoming interface.

Token NHLFE entry index.

Oper Operation type: POP, POPGO, SWAPGO, or NULL.

LSP-Type

LSP type: LDP LSP, CR-LDP, RSVP LSP, BGP LSP, L3VPN

LSP, STATIC LSP, STATIC CR-LSP, L2VPN LSP, or BGP

IPv6 LSP.

Swap-Label Label for swapping.

# Display detailed information about all ILM entries.

<Sysname> display mpls ilm verbose

Total ILM Entry: 2

**In Label : 60

LSP Type : STATIC LSP

In Interface : Eth1/1

VRF Index : 0

Operation : NULL

Swap Label : -

Out Interface : -

Status : MAIN

Create Time : 07:55:06:921

Last Change Time : 07:55:06:921

Tunnel ID : 0xc0001(Done)

GrCount: 0

**In Label : 80

LSP Type : STATIC LSP