R2511-HP MSR Router Series MPLS Command Reference(V5)

7
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number. Without this argument,
the command displays information about all MPLS-enabled interfaces.
verbose: Displays detailed information. Without this keyword, the command displays brief information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display brief information about all MPLS-enabled interfaces.
<Sysname> display mpls interface
Interface Status TE Attr LSP Count CRLSP Count
Eth1/1 Up Dis 2 0
Eth1/2 Up Dis 2 0
# Display detailed information about the MPLS-enabled interface Ethernet 1/1.
<Sysname> display mpls interface ethernet 1/1 verbose
No : 1
Interface : Eth1/1
Status : Up
TE Attribute : Disable
LSPCount : 2
CR-LSPCount : 0
FRR : Disabled
Table 4 Command output
Field Descri
p
tion
TE Attr/TE Attribute Indicates whether TE is enabled on the interface.
LSP Count/LSPCount Number of LSPs on the interface.
CR-LSP Count/CR-LSPCount Number of CR-LSPs on the interface.
FRR
Indicates whether FRR is enabled on the interface. If FRR is enabled, the
output will also include the bound tunnels.
For information about FRR, see MPLS Configuration Guide.
Related commands
• display mpls statistics interface
• mpls