R2511-HP MSR Router Series MPLS Command Reference(V5)

187
undo tunnel-policy tunnel-policy-name
Views
System view
Default command level
2: System level
Parameters
tunnel-policy-name: Specifies the name for the tunneling policy, a string of 1 to 19 characters.
Examples
# Create a tunneling policy named po1 and enter tunneling policy view.
<Sysname> system-view
[Sysname] tunnel-policy po1
[Sysname-tunnel-policy-po1]
Related commands
tunnel select-seq
tunnel select-seq
Use tunnel select-seq to configure the preference order for tunnel selection and the number of tunnels for
load balancing.
Use undo tunnel select-seq to restore the default.
Syntax
tunnel select-seq { cr-lsp | gre | lsp } * load-balance-number number
undo tunnel select-seq
Default
The tunnel selection preference order is: LSP tunnels, GRE tunnels, CR-LSP tunnels, and the number of
tunnels for load balancing is 1—no load balancing.
Views
Tunneling policy view
Default command level
2: System level
Parameters
cr-lsp: Specifies CR-LSP tunnels.
gre: Specifies GRE tunnels.
lsp: Specifies LSP tunnels.
load-balance-number number: Specifies the number of tunnels for load balancing, in the range of 1 to
8.
Usage guidelines
Only tunnels of the types specified in the tunnel select-seq command can be used.
A tunnel type closer to the select-seq keyword has a higher priority.