R2511-HP MSR Router Series MPLS Command Reference(V5)

281
Default command level
2: System level
Usage guidelines
With RSVP reliability enabled, the device adds objects Message_ID and Message_ID_ACK into the
outgoing RSVP messages. The objects will be used for RSVP message acknowledgment to improve
reliability.
Examples
# Enable the RSVP reliability mechanism on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] mpls rsvp-te reliability
mpls rsvp-te resvconfirm
Use mpls rsvp-te resvconfirm to enable reservation confirmation on the current node.
Use undo mpls rsvp-te resvconfirm to disable reservation confirmation.
Syntax
mpls rsvp-te resvconfirm
undo mpls rsvp-te resvconfirm
Default
Resource reservation confirmation is disabled.
Views
MPLS view
Default command level
2: System level
Usage guidelines
When the reservation confirmation mechanism is enabled on a node, a Resv message sent by the node
carries an object that requires reservation confirmation. The node that receives the Resv message must
send back a ResvConf message to confirm the reservation.
Examples
# Enable reservation confirmation on your device.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te resvconfirm
mpls rsvp-te srefresh
Use mpls rsvp-te srefresh to enable summary refresh.
Use undo mpls rsvp-te srefresh to restore the default.
Syntax
mpls rsvp-te srefresh