R2511-HP MSR Router Series MPLS Command Reference(V5)

284
Usage guidelines
Before configuring this command, enable the hello mechanism in MPLS view.
Examples
# Set the hello interval to five seconds.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te timer hello 5
Related commands
• mpls rsvp-te hello
• mpls rsvp-te hello-lost
mpls rsvp-te timer refresh
Use mpls rsvp-te timer refresh to configure the path/reservation state refresh interval.
Use undo mpls rsvp-te timer refresh to restore the default.
Syntax
mpls rsvp-te timer refresh timevalue
undo mpls rsvp-te timer refresh
Default
The path/reservation state refresh interval is 30 seconds.
Views
MPLS view
Default command level
2: System level
Parameters
timevalue: Specifies the refresh interval in the range of 10 to 65535 seconds.
Examples
# Set the path/reservation state refresh interval to 60 seconds.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te timer refresh 60
Related commands
mpls rsvp-te keep-multiplier
mpls rsvp-te timer retransmission
Use mpls rsvp-te timer retransmission to enable RSVP message retransmission.
Use undo mpls rsvp-te timer retransmission to restore the default.