R2511-HP MSR Router Series MPLS Command Reference(V5)

310
[Sysname] interface tunnel 0
[Sysname-Tunnel0] mpls te record-route
mpls te reoptimization (tunnel interface view)
Use mpls te reoptimization to enable reoptimization on the tunnel.
Use undo mpls te reoptimization to disable reoptimization on the tunnel.
Syntax
mpls te reoptimization [ frequency seconds ]
undo mpls te reoptimization
Default
Reoptimization is disabled.
Views
Tunnel interface view
Default command level
2: System level
Parameters
frequency seconds: Specifies reoptimization frequency in the range of 1 to 604800 seconds. The default
is 3600 seconds, or 1 hour.
Usage guidelines
The reoptimization function cannot be used together with these commands: mpls te auto-bandwidth
adjustment, mpls te route-pinning, mpls te backup, and mpls te resv-style ff.
Examples
# Enable reoptimization, setting the reoptimization (automatic rerouting) frequency to 43200 seconds
(12 hou rs) .
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] mpls te reoptimization frequency 43200
mpls te reoptimization (user view)
Use mpls te reoptimization to start reoptimizing all reoptimization-enabled TE tunnels.
Syntax
mpls te reoptimization
Views
User view
Default command level
2: System level
Examples
# Start reoptimizing all reoptimization-enabled TE tunnels.
<Sysname> mpls te reoptimization