R2511-HP MSR Router Series MPLS Command Reference(V5)

321
packet," and 5 means "Respond using the reverse CR-LSP of the bidirectional MPLS TE tunnel" (not
supported). The default is 2.
-s packet-size: Specifies the payload length of the Echo Request messages. The value range for the
packet-size argument is 65 to 8100, and the default is to 100, in bytes.
-t time-out: Specifies the timeout interval for waiting for the response to an echo request message. The
value range for the time-out argument is 0 to 65535, and the default is 2000, in milliseconds.
-v: Displays detailed response information.
te interface-type interface-number: Specifies a tunnel interface.
Examples
# Use the ping function to check the connectivity of the MPLS TE tunnel Tunnel1.
<Sysname> ping lsp te tunnel 1
LSP Ping FEC: TE TUNNEL IPV4 SESSION QUERY Tunnel1 : 100 data bytes, press CTRL_C to break
Reply from 100.1.2.1: bytes=100 Sequence=0 time = 31 ms
Reply from 100.1.2.1: bytes=100 Sequence=1 time = 62 ms
Reply from 100.1.2.1: bytes=100 Sequence=2 time = 62 ms
Reply from 100.1.2.1: bytes=100 Sequence=3 time = 62 ms
Reply from 100.1.2.1: bytes=100 Sequence=4 time = 62 ms
--- FEC: TE TUNNEL IPV4 SESSION QUERY Tunnel1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 31/55/62 ms
reset mpls rsvp-te statistics
Use reset mpls rsvp-te statistics to clear statistics about RSVP-TE.
Syntax
reset mpls rsvp-te statistics { global | interface [ interface-type interface-number ]
Views
User view
Default command level
1: Monitor level
Parameters
global: Clears statistics about global RSVP-TE.
interface: Clears statistics about RSVP-TE for all interfaces.
interface interface-type interface-number: Specifies an interface by its type and number. If an interface
is specified, the command clears the statistics about RSVP-TE for the interface.
Examples
# Clear statistics about global RSVP-TE.
<Sysname> reset mpls rsvp-te statistics global